Athugið!

Búðin er lokuð  í dag.

Hafið samband við 865-1515 ef þörf er á.

Vörur
  • 2 tents in one, on its side it’s a propagation tent, stand upright and move the lighting bars to have a great little stock plant tent.

    • Size: 0.7m x 0.9m x 0.5m
    • Air extraction through the roof via a 125mm (5”) sock
    • 1 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use

    Recommendations:

    • Ideal for 2 large ROOT!T® propagators and 2 trays of Cultilene CRB cubes
    • Use with PowerPlant® SunMate Propagate or ROOT!T® T5 series lamps

    LightHouse® LITE Core Specification:

    • Tri Layer 210D material with the special LightHouse® UltraLux reflective liner
    • Quality Tivax double lined zips, easy-to-use with no snagging and offering good light proofing
    • Main frame made from 16mm steel poles with nylon corners
    • One piece waterproof insert tray
    • All outlets for air and cables are double lined and light-tight with pull toggles on each lining
    • 2 x Filter straps
    • Door clips on all doors for fastening when open
    16.500
    0
    • Size: 1m x 1m x 2m
    • Air extraction through the roof via a 250mm (10”) sock
    • 2 x inline 250mm (10”) socks for use with air-cooled lighting
    • 2 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
    • 1 x intake sock 250mm (10")

    Recommendations:

    • Ideal for use as a drying storage environment when used with the LightHouse® DryNet
    • For single lamp set up - 400w HID
    • Exhaust fan around 350m3

    LightHouse® LITE Core Specification:

    • Tri Layer 210 Denier material with the special LightHouse® UltraLux reflective liner
    • Quality Tivax double lined zips, easy-to-use with no snagging and offering good light-proofing
    • Main frame made from 16mm steel poles with nylon corners
    • One piece waterproof insert tray
    • All outlets for air and cables are double lined and light-tight with pull toggles on each lining
    • 2 x Filter straps
    • Door clips on all doors for fastening when open
    25.900
    0
    • Size: 1.2m x 1.2m x 2m
    • Air extraction through the roof via a 250mm (10”) sock
    • 2 x inline 250mm (10”) socks for use with air-cooled lighting
    • 2 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
    • 1 x intake sock 250mm (10")

    Recommendations:

    • Ideal for the PLANT!T® aeros IV
    • For single lamp set up - 600w HID
    • Exhaust fan around 440m3

    LightHouse® LITE Core Specification:

    • Tri Layer 210 Denier material with the special LightHouse® UltraLux reflective liner
    • Quality Tivax double lined zips, easy-to-use with no snagging and offering good light-proofing
    • Main frame made from 16mm steel poles with nylon corners
    • One piece waterproof insert tray
    • All outlets for air and cables are double lined and light-tight with pull toggles on each lining
    • 2 x Filter straps
    • Door clips on all doors for fastening when open
    28.900
    0
    • Size: 1m x 1m x 2m
    • Pole size: 22mm
    • 2 options on air out, through the roof or side
    • 1 x base side air in with a 250mm (10”) ducting gland
    • 2 x inline 250mm (10”) socks for use with air-cooled lighting
    • 2 x 100mm (4”) cable glands
    • 3 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
    • 2 x side doors for easy access to crop
    • 4 x Filter straps

    Recommendations:

    • Ideal when used with the LightHouse® DryNet
    • For single lamp set up - 400w HID
    • Exhaust fan around 350m3

    Additional MAX Features:

    • Strong, reliable poles with welded metal corners
    • Lighthouse® MAX frames are some of the best on the market, benefitting from metal welded corners and 22mm to 25mm diameter steel poles for the ultimate in strength

    MAX Apertures

    Aperture covers for full light-proofing when the larger apertures are not in use. Larger MAX models also feature low level air intake fan sock – more controllable airflow

    LightHouse® MAX Core Specification:

    • Heavy duty Tri Layer 600 Denier material with the special LightHouse® UltraLux reflective liner
    • Quality Tivax double lined zips that are easy-to-use with no snagging and offering good light-proofing
    • Frame - 22mm or 25mm steel poles with welded metal corners - offering ultimate strength and durability
    • All outlets for air and cables are double lined and light tight with pull toggles on each lining
    • All larger air out socks benefit from outer attachable Velcro covers to stop light when not in use
    • Roof poles with rubber ends for strong grip
    • One piece waterproof insert tray
    • Velcro handy straps for securing cables and wires
    • Door clips on all doors for fastening when open
    • Supplied in a strong fabric carry bag
    35.800
    0
    • Size: 1.2m x 1.2m x 2m
    • Pole size: 25mm
    • 2 options on air out, through the roof or side
    • 1 x base side air in with a 300mm (12”) ducting gland
    • 2 x inline 300mm (12”) socks for use with air-cooled lighting
    • 2 x 100mm (4”) cable glands
    • 3 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
    • 2 x side doors for easy access to crop
    • 4 x Filter straps

    Recommendations:

    • Ideal for the PLANT!T® aeros IV
    • For single lamp set up - 600w HID
    • Exhaust fan around 440m3

    NOTE:

    This tent will hold a fan inside the 300mm socks.

    Additional MAX Features:

    • Strong, reliable poles with welded metal corners
    • LightHouse® MAX frames are some of the best on the market, benefitting from metal welded corners and 22mm to 25mm diameter steel poles for the ultimate in strength

    MAX Apertures

    Aperture covers for full light-proofing when the larger apertures are not in use. Larger MAX models also feature low level air intake fan sock – more controllable airflow

    LightHouse® MAX Core Specification:

    • Heavy duty Tri Layer 600 Denier material with the special LightHouse® UltraLux reflective liner
    • Quality Tivax double lined zips that are easy-to-use with no snagging and offering good light-proofing
    • Frame - 22mm or 25mm steel poles with welded metal corners - offering ultimate strength and durability
    • All outlets for air and cables are double lined and light tight with pull toggles on each lining
    • All larger air out socks benefit from outer attachable Velcro covers to stop light when not in use
    • Roof poles with rubber ends for strong grip
    • One piece waterproof insert tray
    • Velcro handy straps for securing cables and wires
    • Door clips on all doors for fastening when open
    • Supplied in a strong fabric carry bag
    45.900
    0
    • Size: 1.5m x 1.5m x 2m
    • Pole size: 25mm
    • 2 options on air out, through the roof or side
    • 1 x base side air in with a 300mm (12”) ducting gland
    • 2 x inline 300mm (12”) socks for use with air-cooled lighting
    • 2 x 100mm (4”) cable glands
    • 3 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
    • 2 x side doors for easy access to crop
    • 4 x Filter straps

    Recommendations:

    • Ideal for the PLANT!T® aeros IV
    • For single lamp set up - 1000w HID
    • Exhaust fan 125mm (5")

    NOTE:

    This tent will hold a fan inside the 300mm socks.

    Additional MAX Features:

    • Strong, reliable poles with welded metal corners
    • LightHouse® MAX frames are some of the best on the market, benefitting from metal welded corners and 22mm to 25mm diameter steel poles for the ultimate in strength

    MAX Apertures

    Aperture covers for full light-proofing when the larger apertures are not in use. Larger MAX models also feature low level air intake fan sock – more controllable airflow

    LightHouse® MAX Core Specification:

    • Heavy duty Tri Layer 600 Denier material with the special LightHouse® UltraLux reflective liner
    • Quality Tivax double lined zips that are easy-to-use with no snagging and offering good light-proofing
    • Frame - 22mm or 25mm steel poles with welded metal corners - offering ultimate strength and durability
    • All outlets for air and cables are double lined and light tight with pull toggles on each lining
    • All larger air out socks benefit from outer attachable Velcro covers to stop light when not in use
    • Roof poles with rubber ends for strong grip
    • One piece waterproof insert tray
    • Velcro handy straps for securing cables and wires
    • Door clips on all doors for fastening when open
    • Supplied in a strong fabric carry bag
    53.900
    0
    • Size: 2m x 2m x 2m
    • Pole size: 25mm
    • 4 options on air out, through the roof or side
    • 2 x one piece waterproof insert tray
    • 1 x base side air in with a 300mm (12”) ducting gland
    • 4 x inline 300mm (12”) socks for use with air-cooled lighting
    • 4 x 100mm (4”) cable glands
    • 6 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
    • 2 x side doors, plus large rear door for easy access to crop
    • 8 x Filter straps

    Recommendations:

    • For four lamp set up - 4 x 400w HID
    • Exhaust fan around 1100m3

    NOTE:

    This tent will hold a fan inside the 300mm socks. On this model, access from the front can either be by using the two inner curved doors or if full access is required, just zip the entire front off!

    Additional MAX Features:

    • Strong, reliable poles with welded metal corners
    • LightHouse® MAX frames are some of the best on the market, benefitting from metal welded corners and 22mm to 25mm diameter steel poles for the ultimate in strength

    MAX Apertures

    Aperture covers for full light-proofing when the larger apertures are not in use. Larger MAX models also feature low level air intake fan sock – more controllable airflow

    LightHouse® MAX Core Specification:

    • Heavy duty Tri Layer 600 Denier material with the special LightHouse® UltraLux reflective liner
    • Quality Tivax double lined zips that are easy-to-use with no snagging and offering good light-proofing
    • Frame - 22mm or 25mm steel poles with welded metal corners - offering ultimate strength and durability
    • All outlets for air and cables are double lined and light tight with pull toggles on each lining
    • All larger air out socks benefit from outer attachable Velcro covers to stop light when not in use
    • Roof poles with rubber ends for strong grip
    • One piece waterproof insert tray
    • Velcro handy straps for securing cables and wires
    • Door clips on all doors for fastening when open
    • Supplied in a strong fabric carry bag
    89.000
    0
    • Size: 1.2m x 2.4m x 2m
    • Pole size: 25mm
    • 2 options on air out, through the roof or side
    • 1 x base side air in with a 300mm (12”) ducting gland
    • 2 x inline 300mm (12”) socks for use with air-cooled lighting
    • 3 x 100mm (4”) cable glands
    • 4 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
    • 2 x side doors, plus large rear door for easy access to crop
    • 4 x Filter straps

    Recommendations:

    • Two lamp set up - 2 x 600w HID
    • Exhaust fan around 700m3

    NOTE:

    This tent will hold a fan inside the 300mm socks. On this model, access from the front can either be by using the two inner curved doors or if full access is required, just zip the entire front off!

    Additional MAX Features:

    • Strong, reliable poles with welded metal corners
    • LightHouse® MAX frames are some of the best on the market, benefitting from metal welded corners and 22mm to 25mm diameter steel poles for the ultimate in strength

    MAX Apertures

    Aperture covers for full light-proofing when the larger apertures are not in use. Larger Max models also feature low level air intake fan sock – more controllable airflow

    LightHouse® MAX Core Specification:

    • Heavy duty Tri Layer 600 Denier material with the special LightHouse® UltraLux reflective liner
    • Quality Tivax double lined zips that are easy-to-use with no snagging and offering good light-proofing
    • Frame - 22mm or 25mm steel poles with welded metal corners - offering ultimate strength and durability
    • All outlets for air and cables are double lined and light tight with pull toggles on each lining
    • All larger air out socks benefit from outer attachable Velcro covers to stop light when not in use
    • Roof poles with rubber ends for strong grip
    • One piece waterproof insert tray
    • Velcro handy straps for securing cables and wires
    • Door clips on all doors for fastening when open
    • Supplied in a strong fabric carry bag
    69.900
    0
    • Size: 2.4m x 2.4m x 2m
    • Pole size: 25mm
    • 4 options on air out, through the roof or side
    • 2 x one piece waterproof insert tray
    • 1 x base side air in with a 300mm (12”) ducting gland
    • 4 x inline 300mm (12”) socks for use with air-cooled lighting
    • 4 x 100mm (4”) cable glands
    • 6 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
    • 2 x side doors, plus large rear door for easy access to crop
    • 8 x Filter straps

    Recommendations:

    • For four lamp set up - 4 x 600w HID or 4 x 1000W HID
    • Exhaust fan around 1400m3

    NOTE:

    This tent will hold a fan inside the 300mm socks. On this model, access from the front can either be by using the two inner curved doors or if full access is required, just zip the entire front off!

    Additional MAX Features:

    • Strong, reliable poles with welded metal corners
    • LightHouse® MAX frames are some of the best on the market, benefitting from metal welded corners and 22mm to 25mm diameter steel poles for the ultimate in strength

    MAX Apertures

    Aperture covers for full light-proofing when the larger apertures are not in use. Larger MAX models also feature low level air intake fan sock – more controllable airflow

    LightHouse® MAX Core Specification:

    • Heavy duty Tri Layer 600 Denier material with the special LightHouse® UltraLux reflective liner
    • Quality Tivax double lined zips that are easy-to-use with no snagging and offering good light-proofing
    • Frame - 22mm or 25mm steel poles with welded metal corners - offering ultimate strength and durability
    • All outlets for air and cables are double lined and light tight with pull toggles on each lining
    • All larger air out socks benefit from outer attachable Velcro covers to stop light when not in use
    • Roof poles with rubber ends for strong grip
    • One piece waterproof insert tray
    • Velcro handy straps for securing cables and wires
    • Door clips on all doors for fastening when open
    • Supplied in a strong fabric carry bag
    119.000
    0
    • Size:3m x 3m x 2m
    • Pole size: 25mm
    • 4 options on air out, through the roof or side
    • 2 x one piece waterproof insert tray
    • 1 x base side air in with a 300mm (12”) ducting gland
    • 4 x inline 300mm (12”) socks for use with air-cooled lighting
    • 4 x 100mm (4”) cable glands
    • 6 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
    • 2 x side doors, plus large rear door for easy access to crop
    • 8 x Filter straps

    Recommendations:

    • For four lamp set up - 4 x 600w HID or 4 x 1000W HID
    • Exhaust fan around 1400m3

    NOTE:

    This tent will hold a fan inside the 300mm socks. On this model, access from the front can either be by using the two inner curved doors or if full access is required, just zip the entire front off!

    Additional MAX Features:

    • Strong, reliable poles with welded metal corners
    • LightHouse® MAX frames are some of the best on the market, benefitting from metal welded corners and 22mm to 25mm diameter steel poles for the ultimate in strength

    MAX Apertures

    Aperture covers for full light-proofing when the larger apertures are not in use. Larger MAX models also feature low level air intake fan sock – more controllable airflow

    LightHouse® MAX Core Specification:

    • Heavy duty Tri Layer 600 Denier material with the special LightHouse® UltraLux reflective liner
    • Quality Tivax double lined zips that are easy-to-use with no snagging and offering good light-proofing
    • Frame - 22mm or 25mm steel poles with welded metal corners - offering ultimate strength and durability
    • All outlets for air and cables are double lined and light tight with pull toggles on each lining
    • All larger air out socks benefit from outer attachable Velcro covers to stop light when not in use
    • Roof poles with rubber ends for strong grip
    • One piece waterproof insert tray
    • Velcro handy straps for securing cables and wires
    • Door clips on all doors for fastening when open
    • Supplied in a strong fabric carry bag
    149.000
    0
    • Size: 0.5m x 1m x 1.8m
    • Pole size: 22mm
    • Air out is through the roof with a 200mm (8”) ducting gland
    • 2 x inline 200mm (8”) socks for use with air-cooled lighting
    • 2 x 100mm (4”) cable glands
    • 3 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
    • 4 x Filter straps

    Recommendations:

    • For single lamp set up - either a 250w HID or high wattage CFL
    • Exhaust fan around 180m3

    Additional MAX Features:

    • Strong, reliable poles with welded metal corners
    • Lighthouse® MAX frames are some of the best on the market, benefitting from metal welded corners and 22mm to 25mm diameter steel poles for the ultimate in strength

    MAX Apertures

    Aperture covers for full light-proofing when the larger apertures are not in use. Larger Max models also feature low level air intake fan sock – more controllable airflow

    LightHouse® MAX Core Specification:

    • Heavy duty Tri Layer 600 Denier material with the special LightHouse® UltraLux reflective liner
    • Quality Tivax double lined zips that are easy-to-use with no snagging and offering good light-proofing
    • Frame - 22mm or 25mm steel poles with welded metal corners - offering ultimate strength and durability
    • All outlets for air and cables are double lined and light tight with pull toggles on each lining
    • All larger air out socks benefit from outer attachable Velcro covers to stop light when not in use
    • Roof poles with rubber ends for strong grip
    • One piece waterproof insert tray
    • Velcro handy straps for securing cables and wires
    • Door clips on all doors for fastening when open
    • Supplied in a strong fabric carry bag
    27.900
    0
    • Size: 0.76m x 0.76m x 1.8m
    • Pole size: 22mm
    • Air out is through the roof with a 200mm (8”) ducting gland
    • 2 x inline 200mm (8”) socks for use with air-cooled lighting
    • 2 x 100mm (4”) cable glands
    • 3 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
    • 4 x Filter straps

    Recommendations:

    • For single lamp set up - either a 400w HID or high wattage CFL
    • Exhaust fan around 220m3

    Additional MAX Features:

    • Strong, reliable poles with welded metal corners
    • Lighthouse® MAX frames are some of the best on the market, benefitting from metal welded corners and 22mm to 25mm diameter steel poles for the ultimate in strength

    MAX Apertures

    Aperture covers for full light-proofing when the larger apertures are not in use. Larger MAX models also feature low level air intake fan sock – more controllable airflow

    LightHouse® MAX Core Specification:

    • Heavy duty Tri Layer 600 Denier material with the special LightHouse® UltraLux reflective liner
    • Quality Tivax double lined zips that are easy-to-use with no snagging and offering good light-proofing
    • Frame - 22mm or 25mm steel poles with welded metal corners - offering ultimate strength and durability
    • All outlets for air and cables are double lined and light tight with pull toggles on each lining
    • All larger air out socks benefit from outer attachable Velcro covers to stop light when not in use
    • Roof poles with rubber ends for strong grip
    • One piece waterproof insert tray
    • Velcro handy straps for securing cables and wires
    • Door clips on all doors for fastening when open
    • Supplied in a strong fabric carry bag
    29.900
    0
  • Size: 1.5m x 1.5m x 2.2mPole size: 25mm2 options on extraction via roof or side2 x inline 300mm (12”) socks for use with air-cooled lighting2 x 100mm (4”) cable glands3 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use2 x side doors for easy access to plants4 x Filter strapsRecommendations:Minimum extraction fan size 125mm (5")LightHouse® MAX Core Specification:Heavy duty Tri Layer 600 Denier material with the special LightHouse® UltraLux reflective linerQuality Tivax double lined zips that are easy-to-use with no snagging and offering good light-proofingFrame - 25mm steel poles with welded metal corners - offering ultimate strength and durabilityAll outlets for air and cables are double lined and light tight with pull toggles on each liningAll larger air out socks benefit from outer attachable Velcro covers to stop light when not in useRoof poles with rubber ends for strong gripTwo waterproof insert trayVelcro handy straps for securing cables and wiresDoor clips on all doors for fastening when open
    67.900
    0
  • Size: 3m x 1.5m x 2.2mPole size: 25mm4 options on extraction via roof or side4 x inline 300mm (12”) socks for use with air-cooled lighting4 x 100mm (4”) cable glands6 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use2 x side doors for easy access to plants8 x Filter strapsRecommendations:Minimum extraction fan size 150mm (6")LightHouse® MAX Core Specification:Heavy duty Tri Layer 600 Denier material with the special LightHouse® UltraLux reflective linerQuality Tivax double lined zips that are easy-to-use with no snagging and offering good light-proofingFrame - 25mm steel poles with welded metal corners - offering ultimate strength and durabilityAll outlets for air and cables are double lined and light tight with pull toggles on each liningAll larger air out socks benefit from outer attachable Velcro covers to stop light when not in useRoof poles with rubber ends for strong gripTwo waterproof insert trayVelcro handy straps for securing cables and wiresDoor clips on all doors for fastening when open
    109.900
    0
  • Size: 3m x 3m x 2.2mPole size: 25mm4 options on extraction via roof or side4 x inline 300mm (12”) socks for use with air-cooled lighting4 x 100mm (4”) cable glands6 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use2 x side doors for easy access to plants8 x Filter strapsRecommendations:For 4 x 1000w lamps or 4 x 600w.Minimum extraction fan size 200mm (8")LightHouse® MAX Core Specification:Heavy duty Tri Layer 600 Denier material with the special LightHouse® UltraLux reflective linerQuality Tivax double lined zips that are easy-to-use with no snagging and offering good light-proofingFrame - 25mm steel poles with welded metal corners - offering ultimate strength and durabilityAll outlets for air and cables are double lined and light tight with pull toggles on each liningAll larger air out socks benefit from outer attachable Velcro covers to stop light when not in useRoof poles with rubber ends for strong gripTwo waterproof insert trayVelcro handy straps for securing cables and wiresDoor clips on all doors for fastening when open
    169.000
    0
  • Hentar vel fyrir hangandi CFL perur.  Hentugt fyrir kryddjurtir og fræ.
    22.900
    0
  • Tjald fyrir forræktun. Hentugt fyrir kryddjurtir og fræ.
    57.850
    0
  • Tvískipt tjald  sem hentar vel fyrir blómstrun, uppvöxt og forræktun.
    46.800
    0
  • Tvískipt tjald  sem hentar vel fyrir blómstrun, uppvöxt og forræktun.
    61.900
    0
  • Tvískipt tjald  sem hentar vel fyrir blómstrun, uppvöxt og forræktun.
    96.800
    0
  • Tvískipt tjald  sem hentar vel fyrir blómstrun, uppvöxt og forræktun. 
    36.800
    0
  • Klætt með ORCA  filmu að innan.
    159.000
    0